Dear a distinguished Acer users, Acer is currently the introduction of new notebook products molds (including TM, AS series, such as the AS4920, TM6292, etc.) as a result of the use of Intel chips, the relationship between the new motherboard, in the normal course of the installation of XP will reportedly "not to identify Hard ", the specific installation process will be conducted in the following description:
1. First of all, if a customer's computer has the vista pre-installed systems, the latter converted XP key recovery will be lost, if a customer after the need to restore the vista system, please burn vista system recovery disk and driver disk, the specific operation is as follows:
Empowering Technology Select toolbar feature eRecovery
Select the "burn disk" feature to burn "set off by default" "driver disk" can be
2. To install XP, you need to prepare a USB floppy drive and select the appropriate model from the XP driver. There is a "AHCI" SATA drive, unzip it to find a "F6 Floppy Utility" folder inside "f6flpy32", "f6flpy64" 2 folders, "f6flpy32" for 32-bit XP drivers, "f6flpy64" for 64 XP drivers, run files in that folder will automatically extract the SATA drive to a floppy disk.
3. Below to start the installation XP systems, the SATA driver floppy disk into USB floppy drive, the floppy drive connected to the notebook, and then boot. Emergence of "Acer" boot screen by "F2" key to enter the BIOS interface
By "→" arrow keys to move your cursor to the "Boot" option Press "↑" "↓" arrow keys to move the cursor to drive on and then "F5" or "F6" button to start the drive to move to the first set of see the figure below:
Set after "EXIT" option to save your changes and exit, while Add XP installation CD-ROM
Press any key to restart after the XP CD-ROM from the start XP installation interface appears, press "F6" button to import from the floppy drive
By the "S" button to select the appropriate SATA drives too Press "↑" "↓" arrow keys to move the cursor on the corresponding drive
General AS4920, TM4720, such as choice AS4310, TM5710, such as choice Press "Enter" button to confirm after the following interface and then press "Enter" button to confirm
Press "Enter" to start the installation of XP If you choose the correct SATA drives, and you will find the following hard disk interface for hard disk partition
If the newspaper can not find the hard disk, repeat the above operations can select another SATA drive.
By "D" key to delete all partitions, and then "C" key to the redevelopment district, select the required zoning by "Enter" key to continue to install XP.
Finally, if a customer to install XP in the process are still having problems, please call the following Maintenance Center advisory:
Acer users, Acer is currently the introduction of new notebook products molds (including TM, AS series, such as the AS4920, TM6292, etc.) as a result of the use of Intel chips, the relationship between the new motherboard, install XP in the normal process of reported "less than a hard drive to identify" problem, specific installation process will be conducted in the following description:
1. First of all, if a customer's computer has the vista pre-installed systems, the latter converted XP key recovery will be lost, if a customer after the need to restore the vista system, please burn vista system recovery disk and driver disk, the specific operation is as follows: Empowering Technology Select toolbar feature eRecovery
Select the "burn disk" feature to burn "set off by default" "driver disk" can be
2. To install XP, you need to prepare a USB floppy drive and select the appropriate model from the XP driver. There is a "AHCI" SATA drive, unzip it to find a "F6 Floppy Utility" folder inside "f6flpy32", "f6flpy64" 2 folders, "f6flpy32" for 32-bit XP drivers, "f6flpy64" for 64 XP drivers, run files in that folder will automatically extract the SATA drive to a floppy disk.
3. Below to start the installation XP systems, the SATA driver floppy disk into USB floppy drive, the floppy drive connected to the notebook, and then boot. Emergence of "Acer" boot screen by "F2" key to enter the BIOS interface
By "→" arrow keys to move your cursor to the "Boot" option Press "↑" "↓" arrow keys to move the cursor to drive on and then "F5" or "F6" button to start the drive to move to the first set of see the figure below:
Set after "EXIT" option to save your changes and exit, while Add XP installation CD-ROM
Press any key to restart after the XP CD-ROM from the start
XP installation interface appears, press "F6" button to import from the floppy drive
By the "S" button to select the appropriate SATA drives too
Press "↑" "↓" arrow keys to move the cursor on the corresponding drive
General AS4920, TM4720, such as choice
AS4310, TM5710, such as choice
Press "Enter" button to confirm after the following interface and then press "Enter" button to confirm
Press "Enter" to start the installation of XP
If you choose the correct SATA drives, and you will find the following hard disk interface for hard disk partition
If the newspaper can not find the hard disk, repeat the above operations can select another SATA drive.
By "D" key to delete all partitions, and then "C" key to the redevelopment district, select the required zoning by "Enter" key to continue to install XP.
No comments:
Post a Comment